How to Remove Drawer From Pottery Barn Dresser
To remove a drawer from a Pottery Barn dresser, there are two possible methods.
First, check for a white ‘half moon’ stop or a white plastic lever under the bottom edge of the drawer.
If found, depress these to release the drawer completely.
To reinstall, engage the guide on the bottom of the drawer with the guide in the dresser and push it back into place.
The second method is to grasp the drawer on each side of the front panels and pull sharply to pass over a friction detent and remove it from the case.
If the drawer has side guides instead of a center guide, it is recommended to contact the Broyhill Consumer Center for assistance.
Check this out:
Did You Know?
1. The Pottery Barn Dresser was inspired by a Danish design from the mid-20th century, known for its clean lines and simplicity.
2. Surprisingly, Pottery Barn was not the original name of the company. When it was first founded in 1949, it was called “Pottery Barn Imports,” but the name was later shortened.
3. Did you know that Pottery Barn often uses sustainable materials in their furniture? They are committed to sourcing wood and other materials from responsibly managed forests, promoting eco-friendly practices.
4. One interesting feature of the Pottery Barn Dresser is its smooth self-closing drawers. This innovative design feature ensures that the drawers close gently, preventing any accidental slamming.
5. If you ever plan to sell a Pottery Barn Dresser, it’s worth noting that certain vintage or limited-edition models can be highly sought after by collectors. So, be sure to check the market value before parting with your dresser!
Common Drawer Guide Style
When it comes to Pottery Barn dressers, the most common drawer guide style is a single track located directly under the center of the drawer. This guide ensures smooth movement and stability when opening or closing the drawer. Understanding this guide style is essential for safely removing and re-installing the drawer.
First Possibility: Look For A Stop Or Lever
To remove a drawer from a Pottery Barn dresser, follow these steps:
- Check for a white “half moon” stop or white plastic lever located under the bottom edge of the drawer.
- If you find either of these components, press or depress them to release the drawer from the dresser.
- When re-installing the drawer, ensure that the guide on the bottom of the drawer is aligned with the guide in the dresser.
- Gently push the drawer back into the case, applying slight pressure if needed.
- Note that there might be some resistance over the detent, but the drawer should slide smoothly back into place.
“Make sure the guide on the bottom of the drawer is engaged with the guide in the dresser.”
- Press or depress the white “half moon” stop or white plastic lever to release the drawer.
- Align the guide on the bottom of the drawer with the guide in the dresser.
- Gently push the drawer back into the case, applying slight pressure if needed.
Re-Installing The Drawer
To re-install the drawer, first ensure that both the drawer and the dresser are stable and secure. Align the guide on the bottom of the drawer with the corresponding guide in the dresser, making sure they are properly lined up.
Next, gently push the drawer back into place, taking note that there might be some resistance due to the detent. Use a firm yet careful push to allow the drawer to smoothly slide back into its original position.
Second Possibility: Removing The Drawer Without A Detent Part
If you cannot find a white detent part on your Pottery Barn dresser’s drawer, do not worry. Follow these steps to remove the drawer:
- Grasp the drawer firmly on each side of the side panels near the front of the case.
- Pull sharply to pass over a friction detent.
- This action will release the drawer, allowing you to remove it from the case.
Remember to hold the drawer firmly and pull with enough force to overcome the friction detent. This method should work even if the white detent part is not visible.
Side Guides: Seeking Assistance From Broyhill Consumer Center
If you have drawers with side guides instead of a center guide or if you face any issues during the removal process, it is recommended to contact the Broyhill Consumer Center for assistance. They are the experts in handling the specific case of removing drawers with side guides. Don’t hesitate to reach out to them for expert help.
Specific Case: Removing The Drawer From A Whitney Desk Unit
In your specific case, you are attempting to remove a drawer from a Whitney desk unit purchased from Pottery Barn. The drawer in question has metal rails on the sides and no apparent levers or rollers.
To remove this kind of drawer, follow these steps:
- Grasp the drawer firmly on each side of the metal rail near the front of the case.
- Give it a sharp pull, overcoming the friction detent, and the drawer will come out of the case smoothly.
By following these step-by-step instructions and considering the specific possibilities and guidance outlined above, you will be able to remove and re-install drawers from your Pottery Barn dresser with ease and confidence.
Remember to exercise caution during the process to avoid any damage to the dresser or the drawer itself.
- Keep a firm grip on the drawer while pulling it out.
- Avoid using excessive force to prevent any accidental damage.
“Remove the drawer by giving it a sharp pull, overcoming the friction detent.”
Frequently Asked Questions
How do you remove a dresser drawer that won’t come out?
Sometimes, a stubborn dresser drawer can prove to be quite the challenge. To tackle this issue, start by giving the drawer a firm jiggle while pulling it outwards. If that doesn’t work, check for any obstructions or items inside the drawer that might be causing the resistance. If it still won’t budge, try applying a little bit of lubricant to the drawer slides or tracks to reduce friction. Alternatively, gently tapping the sides of the drawer with a mallet or a soft hammer may help loosen it. Just remember to exercise caution and avoid using excessive force to prevent any damage to the dresser or harm to yourself.
How do you remove different types of drawers?
To remove different types of drawers, first, inspect the side or bottom of each drawer guide for any clips or levers. In the case of clips, gently detach them and with both hands supporting the bottom of the drawer, carefully pull it out. If levers are present, simultaneously push them down or up, and then proceed to pull the drawer out. By following these methods, you can conveniently remove various types of drawers.
1. What are the steps involved in removing a drawer from a Pottery Barn dresser?
To remove a drawer from a Pottery Barn dresser, you first need to pull out the drawer fully and assess if there are any safety locks or latches. Some dressers might have safety mechanisms that need to be unlocked before removing the drawer. Once you have unlocked any safety features, locate the drawer slides on either side of the drawer. These slides help the drawer move in and out smoothly. Depending on the type of slides, you might need to lift the front of the drawer slightly and tilt it downward to disengage it from the slides. Finally, slide the drawer out completely, making sure to support it from underneath to prevent any damage.
It’s important to note that Pottery Barn dressers could have varying designs and mechanisms, so it’s always a good idea to refer to the specific dresser’s manual or contact customer support if you encounter any difficulties in removing the drawer.
2. Are there any specific tools or techniques that can make removing a drawer from a Pottery Barn dresser easier and more efficient?
Yes, there are some specific tools and techniques that can make removing a drawer from a Pottery Barn dresser easier and more efficient. One helpful tool is a screwdriver, which can be used to remove any screws or fasteners holding the drawer in place. Another useful tool is a rubber mallet, which can be used to gently tap the sides of the drawer to loosen it from its tracks. Additionally, using two people to remove the drawer can make the process more efficient. One person can hold the drawer while the other person unscrews any fasteners and helps guide the drawer out of the dresser.
