How to Level a Husqvarna Mower Deck
To level a Husqvarna mower deck, follow these steps:
1.
Park the mower on a flat surface and measure the tire pressure to ensure it is at the recommended level.
2.
Remove the cutting blades before measuring the distance from the ground.
3.
Using an adjustable wrench, turn the jam nut at the front of the deck to adjust the deck’s level from side to side.
4.
Reinstall the spring and slide the deck forward or backward to adjust the deck’s level from front to back.
5.
Adjust the height control lever’s washer and bracket as needed.
6.
Check the belt routing to ensure it is correct.
7.
Regularly sharpen the blades using a metal file or sandpaper for optimal cutting quality.
Remember to wear work gloves and exercise caution when working with the mower deck.
A level deck is essential for maintaining healthy and well-cut grass.
Check this out:
Did You Know?
1. Did you know that Husqvarna, a Swedish company, actually started out as a weapons manufacturer in the late 17th century? It wasn’t until the late 19th century that they expanded into other areas, including lawnmower production.
2. The Husqvarna Automower, a robotic lawnmower produced by the company, has an interesting safety feature. When it encounters an obstacle, it will gently bump into it and then continue mowing in a different direction, helping to prevent damage to both the mower and the obstacle.
3. If you’ve ever wondered how Husqvarna mowers achieve such a clean and precise cut, it’s because many of their models come equipped with specially designed cutting blades that rotate at incredibly high speeds, ensuring a neat and even trim.
4. Husqvarna mowers are known for their durability, and it’s no surprise considering some of them are put through extreme tests during the manufacturing process. For example, certain models undergo thousands of hours of operation in climatic chambers to ensure their resilience to different weather conditions.
5. In a bid to promote sustainability, Husqvarna has introduced a solar-powered charging station for their Automower series. This innovative feature not only reduces the environmental impact but also ensures that the automatic mowers can power up autonomously, providing a convenient and eco-friendly lawn maintenance solution.
Importance of Leveling a Husqvarna Mower Deck
Maintaining a level mower deck is crucial for achieving optimal results in grass cutting. An uneven deck can cause the blades to cut the grass too closely to the ground, resulting in damage to the grass and an uneven appearance. Additionally, an uneven deck can also put unnecessary stress on the mower’s components, leading to premature wear and tear.
Therefore, it is essential to regularly level the mower deck to ensure a healthy lawn and extend the lifespan of your Husqvarna mower.
- Uneven deck can damage grass and create an uneven look
- Excessive stress on mower components due to uneven deck can result in premature wear and tear
“Regularly leveling the mower deck is crucial for a healthy lawn and prolonging the lifespan of your Husqvarna mower.”
Steps for Adjusting or Leveling the Cutting Deck
To level the cutting deck of your Husqvarna mower, follow these step-by-step instructions:
-
Reroute the belt: Locate the belt and remove it. Make sure it is properly positioned according to the manufacturer’s instructions.
-
Stretch the spring: Using an adjustable wrench, carefully stretch the spring slightly to increase the tension.
-
Remove the cotter pin: Locate the cotter pin that secures the height control lever. Remove it to proceed with the adjustments.
-
Adjust the washer: To level the deck, loosen the height control lever’s washer and adjust its position accordingly. Ensure that the front of the deck is slightly lower than the back.
-
Ensure correct belt routing: Check that the belt is routed correctly to avoid any issues with the deck’s operation. Refer to your Husqvarna mower’s manual for the correct routing instructions.
Tools Needed for Adjusting Deck Height
To properly adjust the deck height of your Husqvarna mower, you will need the following tools:
- Air pressure gauge: This is used to accurately measure the tire pressure.
- Air compressor or tire pump: It is necessary to have one of these tools for inflating or deflating the tires as needed.
- Measuring tape: This tool will help you accurately measure the deck’s height.
- Adjustable wrenches: You will need these wrenches to loosen and tighten the nuts and bolts.
- Work gloves: It is important to wear a pair of protective gloves while making adjustments to ensure your hands are safe.
Measuring Ground Distance Without Blades
Before measuring the distance from the ground, it is important to safely remove the blades of your Husqvarna mower to prevent accidents or injuries. The Husqvarna mower’s manual provides instructions on how to do this.
Once the blades are removed, you can use a measuring tape to measure the distance between the ground and the deck’s surface. This measurement is crucial in ensuring that the deck height is consistent and level.
To summarize the process:
- Remove the blades following instructions in the manual
- Use a measuring tape to measure the distance between the ground and the deck’s surface
Remember to always prioritize safety and refer to the manual for proper guidance.
“Before measuring the distance from the ground, it is important to remove the blades to prevent any accidents or injuries.”
Achieving Level Deck Height: Side to Side and Front to Back
To achieve a level deck height on your Husqvarna mower, follow these steps:
-
Locate the jam nut at the front of the mower. Use an adjustable wrench to turn the jam nut counterclockwise for height adjustment.
-
Reinstall the stretched spring to increase tension.
-
Slide the deck slightly forward to align it properly.
-
Adjust the washer on the height control lever to ensure that the front of the deck is slightly lower than the back.
-
Check the belt for proper tension and alignment, and make any necessary adjustments.
By carefully following these steps, you can achieve a level deck height from side to side and front to back, ensuring an even and precise cut for your lawn.
- Remember to locate the jam nut and turn it counterclockwise to adjust the deck height.
- Reinstall the spring for increased tension.
- Slide the deck forward to align it properly.
- Adjust the washer on the height control lever to ensure the front is slightly lower.
- Check the belt for tension and alignment.
Additional Steps for Leveling the Deck
In addition to the steps mentioned earlier, there are a few additional steps to ensure a properly leveled deck:
-
Park the mower on a flat surface: Before making any adjustments, it is crucial to park the Husqvarna mower on a flat surface. This will provide a stable base for your work.
-
Measure tire pressure: It is important to measure the tire pressure and ensure it falls within the recommended range. Avoid over-inflating the tires, as this can cause damage to both the mower and the grass.
-
Remove the blades: Always follow the manufacturer’s instructions to safely remove the blades. This step is essential to prevent any accidental injuries while working on the deck.
-
Regularly sharpen blades: Sharpening the blades on a regular basis using a metal file or sandpaper will help maintain a clean and precise cut. This will also reduce strain on the deck and facilitate optimal grass cutting quality and health.
Note: It is important to refer to your mower’s manual for specific instructions and take all necessary safety precautions.
- Park the mower on a flat surface
- Measure tire pressure
- Remove the blades
- Regularly sharpen blades
Frequently Asked Questions
Should a mower deck be perfectly level?
While it may seem counterintuitive, a mower deck should not be perfectly level. This slight pitch is essential for optimal mowing results. A deck with a 1/8-inch to 1/2-inch pitch, with a sweet spot around 1/4-inch, allows for better grass cutting and prevents scalping or uneven cutting. An uneven, sloping lawn can benefit from a leveled deck, ensuring an even and consistent cut across the entire yard.
What are the height settings on a Husqvarna mower?
The innovative Husqvarna mower offers versatile height settings, allowing you to effortlessly adjust the cutting height according to your preference. With an impressive range of 1.25 to 4 inches, you have up to 9 height options at your disposal. This convenient feature ensures that your lawn is maintained at the desired length with ease and precision, enhancing the overall aesthetic appeal of your outdoor space. Say goodbye to unevenly trimmed grass and hello to a perfectly groomed lawn every time you use your Husqvarna mower.
When should I level my mower deck?
It is crucial to level your mower deck for a perfectly manicured lawn. It is recommended to level your mower deck at least once or twice a season to ensure optimal results. Additionally, it is essential to level the deck if you have encountered any obstacles such as hitting an object or bumping into a curb. Following a step-by-step process, you can easily level your Select Series mower deck and maintain a pristine lawn throughout the season.
1. What are the proper steps to take in order to properly level a Husqvarna mower deck?
To properly level a Husqvarna mower deck, start by parking the mower on a flat surface and engaging the parking brake. Turn off the mower and disconnect the spark plug wire for safety. Locate the deck height adjustment level located on the rear of the deck, and set it at the highest cutting height. Next, measure the distance from the ground to the edge of the deck on each side, and adjust the deck leveling nuts accordingly until both sides are level. Recheck the measurements to ensure the deck is balanced, and then tighten the leveling nuts securely. Finally, reconnect the spark plug wire and test the mower deck by cutting grass to ensure an even and level cut.